Wuko Master Roof Panel Machine 0420

Wuko Master Roof Panel Machine for making standing seam roof panels (seam height 25 mm/1″)

• Machine frame made of modular aluminium profile system
• Upper machine cover: Swing doors, easy to open, with safety switch, frame elements made of transparent, impact-resistant polycarbonate. Clear view during profiling process, easy access for adjustment and service
• Mobile, two fixed and two swivel castors with brakes
• 230 V motor with frequency converter for continuously variable working speed: 0-12 m/min (0-40 ft/min)

Profiling

• Fabrication of the profile for the single or double-lock standing seam height 25mm/1″
• Working width between 290 and 810 mm/11.5 and 32 continuously adjustable by hand wheel over two spindles. Panel width about 210-730 mm/8.3-28.7
• Inlet guides easily and precisely adjustable (measure correction on the profile)
• Clean profile, poor in tension, made by eight hardened roll forming stations
• 8th forming station for aligning the panels and for curving the panels – convex or concave- smallest radius about 6 m/20
• Cut-proof, extremely resilient polyurethane coated drive rollers
• Electro-mechanic preset counter- safely placed within the frame
• Also for profiling short (min. length about 500 mm/20) or tapered panels

Technical Data

• Maximum Sheet Metal Thickness: Galvanized steel: 0.7 mm/0.028, Aluminium, Copper, Zinc: 0.8 mm/0.031, Stainless Steel: 0.5 mm/0.020
• Motor: 120 V
• Dimensions: Length: 154 cm/60.6 (with guides), Width: 131 cm/51.6 (with handles), Height: 105 cm/41.3
• Weight: Approx. 320 kg/700 lbs